Electrocorder PV-3 Solar Irradiance Power Logger for Industrial and Commercial Appliances

Category: Tag:

Description

The PV-3 data logger is used by installers, householders, renewable energy companies to check PV (photo voltaic) installations. It can record solar irradiation up to 1,500W/m2 (watts per square metre), DC Voltage and DC Current produced by the panel, allowing you to assess the performance of a solar energy installation. The logger will record up to 300 days using the included PSU (power supply unit), data can be downloaded to the free software, Electrosoft and analysed.

Brochure

How to use

The PV-3 is a three-channel Solar Irradiance DC Power logger.  Setup the Logger using the Electrosoft software, then fit it to the points that you’re going to measure.

This logger is designed to be installed by a competent person (generally an electrician or engineer), and if isolated test points are available can be fitted without power interruption.  Once you’re set up, just press the Start button to start logging!  The onboard indicator will flash Green when logging.

When the logger’s finished recording (or you’ve captured enough data!) just disconnect from supply, hook it up to your PC and download the information.  Electrosoft will let you view the data immediately on-screen and save or export for later analysis.

When the logger’s finished recording (or you’ve captured enough data!) just disconnect from supply, hook it up to your PC and download the information. Electrosoft will let you view the data immediately on-screen and save or export for later analysis.